Pressurized Solutions operates a Dynocom 3000 hp Chassis Dyno in our Haleyville, Alabama shop location. The Dyno is available for rent by the hour or by the day and we offer tuning services to help you unleash that hidden horsepower in your car. Call us today at 205.486.7223 or email  This e-mail address is being protected from spambots. You need JavaScript enabled to view it This e-mail address is being protected from spambots. You need JavaScript enabled to view it  for reservations

• Rate: $100/hr with 3 dyno pulls per hour. Time between pulls depends on the vehicle under test and cool down time needed.
• Club Discounts Available: Club and "Dyno Day" Discounts Available for Groups, please contact us for rate details and for scheduling
• Logging: Single Wideband O2 & OBD2 Factory Harness readouts are available. Humidity, Barometric Pressure and Temp are also recorded.
• Horsepower Capability: 3000 Hp at the wheel using Eddy Current Brake
• Special Features: This dyno has the ability to set a load profile for diagnosing hard to troubleshoot issues. If you want to hold the engine at x seconds at x rpm, we can do it.
• Roller Capacity: Minimum 24" wide. Capacity - up to 10,000 lb on the Rollers. Diesel and Large Trucks are not a problem.
• Who Runs Car?: Some customers may be concerned about having "Someone else" run their car. Please do not be concerned about this at Pressurized Solutions. For the safety of your car we have a very experienced Dyno Operator operate both the car and the dyno at the same time because he is well versed in detecting and shutting things down at the first hint of any problems that might come up. If this is a problem with you we may allow you to operate your car depending on HP range and other factors but this must be discussed before renting the dyno.
• Roller Type: X Cut Knurl, (only available on the DynoCom dynos) reduces tire slippage during testing of extreme hp race cars.
• Tuning Services Available: Set timing, Fuel Curves, Jetting, Valve Lash, Float Levels, etc. on both N/A and Nitrous cars for $55/hr
• EFI Tuning: We have tuning and programming experience with Big Stuff, FAST, HP Tuner and Gen 7 on Turbo and Blown cars. Rates are $500 for Tuneup in addition to Dyno Time.
• Parking: Large Trailers contact us before arrival for route and parking options.
• Location: Haleyville, Alabama ( Click for Google Map)
• On Site Restroom?: Yes
• Fire Protection: Safety is of very high importance here at Pressurized Solutions, so multiple fire extinguishers are in place to protect you, your vehicle and the our staff while the vehicle is being tested on the chassis dyno.
• Ventilation System: Fresh air is pulled in through shop door and large CFM Fans pull air through the room during the pull insuring your vehicle as ample fresh air supply.
• Cooling Fans: Several Cooling Fans are available for engine and transmission.

Driving Directions from Nearby Cities

The Pressurized Solutions Dyno Facility is located approximately 82.0 miles  (about 1 hour 44 mins) from Birmingham, Alabama and approximately 112 miles from Huntsville, Alabama (about 2 hours).